Vicki Benjamin Office Design April 22nd, 2018 - 13:25:45
When its time to design your office fit out most people want to know what everyone else is doing in their offices at the moment so that they can do something similar. After all no one wants to be behind the times. So here are three of the current office design trends in Australia and overseas: 1. Writing on Walls It is becoming increasingly popular for companies to want a large space on which to write and brainstorm ideas. This was traditionally done with the standard whiteboard but these days office designers are coming up with more creative ways to do this.
Instead theyve used space imaginatively incorporating a modern office interior design to promote interaction inspiration and work zones to support teams quiet working noisy working... whatever office design layout is needed for the staff to be most effective. Occasionally cost information is presented on a Square Metre basis. The ratio of square feet to square metres is approximately 10.7: 1. Office Fit Out Terminology - Cat A and Cat B CAT A refers to the fit-out or refurbishment undertaken by a Landlord. Typically this will include suspended ceilings and lighting a raised floor with carpet air conditioning sometimes a degree of local power within the open floor area and sometimes even a tea point with integrated plumbing. Showers and WCs are usually included within the base build. CAT A also describes the quality of the Landlords fit-out with a level that is commensurate with a building at the upper end of the rental value for the location.
Office designers have noticed that societies environmental consciousness has transferred into our offices in a number of ways. Owners and managers know that energy costs are rising so there is a need to look for alternative energy sources. They have also seen an increase in the purchase and use of recycled furniture which is a cheaper and more environmentally friendly way of furnishing their office. Office collaboration means that offices are becoming more open plan with less offices and more cubicles or partitions. This type of office design means that space is being used to its maximum ability and owners are getting more for their money. It is useful in offices where there is a lot of team work as it brings people together. Office designers have seen the rise in popularity in partitioning which is a large element in the creation of office collaboration.
Employees have difficulty working productively in noisy environments since stress levels increase and concentration is lowered. There are many design tricks architects can employ to deal with poor acoustics. Using the correct materials in the correct location is key to achieving the proper level of sound absorption. For example ceiling tiles should generally be applied at a low ceiling height. If the ceiling is very high then other methods need to be applied such as lining the walls with fabric banners or acoustical wall panels to avoid the sound bouncing off of drywall or other non-absorbent materials. To keep voices from traveling too far it is useful to places highly-absorbent materials at mouth level throughout the office. Another effective technique in limiting a noisy environment is to create a monotone background sound known as white noise. This can be achieved in a variety of ways such as through the strategic placement of fans and air conditioners the use of water fountains or by installing a sound masking audio system.